actual size http://www.epsontoyocom.co.jp cr y s t a l os c i lla t o r cr y s t a l os c i lla t o r cr y s t a l os c i lla t o r cr y s t a l os c i lla t o r ep s o n t o yo c o m ep s o n t o yo c o m ep s o n t o yo c o m ep s o n t o yo c o m s p ecifications ( characteristics ) ? differential lv-pecl output eg-2121ca eg-2102ca item symbol differential lv-pecl remarks output frequency range f 0 53.125 mhz to 500 mhz 100 mhz to 700 mhz please contact us for inquiries regarding available frequencies. supply voltage v cc 2.5 v 0.125 v 3.3 v 0.3 v storage temperature t_stg -40 c to +100 c store as bare product after unpacking temperature range operating temperature t_use p:0 c to +70 c ,r:-5 c to +85 c ,s:-20 c to +70 c please contact us for inquiries about s spec. frequency tolerance * 1 f_tol g: 50 10 -6 ,h: 100 10 -6 p:0 c to +70 c,r:-5 c to +85 c,s:-20 c to +70 c current consumption i cc 80 ma max. 100 ma max. oe=v cc ,r l =50 ? or 100 ? disable current i_dis 20 ma max. 32 ma max oe=gnd p:40 % to 60 % ( f 0 > 350 mhz) p:45 % to 55 % ( f 0 350 mhz) p:45 % to 55 % symmetry sym d:48 % to 52 % ( f 0 175 mhz) d:48 % to 52 % ( f 0 350 mhz) at outputs crossing point 1.55 v typ. 2.35 v typ. v oh v cc -1.025 v to v cc -0.88 v 0.8 v typ. 1.6 v typ. output voltage v ol v cc -1.81 v to v cc -1.62 v dc characteristics output load condition l_pecl 50 ? terminated to v cc -2.0 v output enable input voltage v ih 70 % v cc min. oe terminal output disable input voltage v il 30 % v cc max. oe terminal rise time / fall time t r / t f 400 ps max. between 20% v cc and80%of (v oh -v ol ) between 20 %and 80 %of differential output peek to peek voltage start-up time t_str 10 ms max. time at minimum supply voltage to be 0 s 0.05 10 -3 ui typ. phase jitter t pj 1 ps max. offset frequency: 12 khz to 20 mhz frequency aging *2 f_aging 10 10 -6 / year max. + 25 c,first year,v cc =2.5 v,3.3 v * 1 as per below table 1. *2 except: *** a ? lvds output eg-2121ca eg-2102ca item symbol lvds remarks output frequency range f 0 53.125 mhz to 700 mhz please contact us for inquiries regarding available frequencies. supply voltage v cc 2.5 v 0.125 v 3.3 v 0.3 v storage temperature t_stg -40 c to +100 c store as bare product after unpacking temperature range operating temperature t_use p:0 c to +70 c ,r:-5 c to +85 c ,s:-20 c to +70 c please contact us for inquiries about s spec. frequency tolerance * 1 f_tol g: 50 10 -6 ,h: 100 10 -6 p:0 c to +70 c,r:-5 c to +85 c,s:-20 c to +70 c current consumption i cc 30 ma max 45 ma max. oe=v cc ,r l =50 ? or 100 ? disable current i_dis 20 ma max 30 ma max. oe=gnd l:40 % to 60 % ( f 0 > 350 mhz) l:40 % to 60 % ( f 0 > 350 mhz) l:45 % to 55 % ( f 0 350 mhz) l:45 % to 55 % ( f 0 350 mhz) symmetry sym v:48 % to 52 % ( f 0 175 mhz) v:48 % to 52 % ( f 0 175 mhz) at outputs crossing point v od 350 mv typ. 247 mv to 454 mv differential output, dc characteristics ? v od 50 mv output change, dc characteristics v os 1.25 v typ. 1.125 v to 1.375 v offset, dc characteristics output voltage ? v os 150 mv offset change, dc characteristics output load condition l_lvds 100 ? connected between out to out output enable input voltage v ih 70 % v cc min. oe terminal output disable input voltage v il 30 % v cc max. oe terminal rise time / fall time t r / t f 400 ps max. between 20% v cc and80%of (v oh -v ol ) between 20 %and 80 %of differential output peek to peek voltage start-up time t_str 10 ms max. time at minimum supply voltage to be 0 s 0.05 10 -3 ui typ. phase jitter t pj 1 ps max. offset frequency: 12 khz to 20 mhz frequency aging * 2 f_aging 10 10 -6 / year max. + 25 c,first year,v cc =2.5 v,3.3 v * 1 as per below table 1. *2 except: *** a eg-2102ca eg-2121ca crystal oscillator low-jitter saw oscillator eg - 2 1 2 1 / 2 1 02ca series ? frequency range : 53.125 mhz to 700 mhz ? supply voltage : 2.5 v (eg-2121ca) : 3.3 v (eg-2102ca) ? output : differential lv-pecl or lvds or hcsl ? function : output enable(oe) ? external dimensions : 7.0 5.0 1.2 t (mm) typ. ? very low jitter and low phase noise by saw unit. product number (please contact us) eg-2 1 2 1 ca: q3805cax0xxxx00 : x 1 m000 1 0 1 xxxx00 eg-2 1 02ca: q3806ca00xxxx00 : x 1 m00009 1 xxxx00
http://www.epsontoyocom.co.jp cr y s t a l os c i lla t o r cr y s t a l os c i lla t o r cr y s t a l os c i lla t o r cr y s t a l os c i lla t o r e p s o n t o y o c o m ep s o n t o yo c o m ep s o n t o yo c o m ep s o n t o yo c o m ? hcsl output eg-2121ca eg-2102ca item symbol hcsl remarks output frequency range f 0 100 mhz to 350 mhz please contact us for inquiries regarding available frequencies. supply voltage v cc 2.5 v 0.125 v 3.3 v 0.3 v storage temperature t_stg -40 c to +125 c store as bare product after unpacking temperature range operating temperature t_use p:0 c to +70 c ,r:-5 c to +85 c ,s:-20 c to +70 c frequency tolerance * 1 f_tol g: 50 10 -6 ,h: 100 10 -6 current consumption i cc 80 ma max. 85 ma max. oe=v cc ,l_hcsl=50 ? disable current i_dis 20 ma max. 35 ma max oe=gnd symmetry sym 45 % to 55 % at outputs crossing point high output voltage v oh 0.75 v typ. low output voltage v ol -0.3 v typ. dc characteristics output load condition l_hcsl 50 ? terminated to gnd output enable input voltage v ih 70 % v cc min. oe terminal output disable input voltage v il 30 % v cc max. oe terminal rise time / fall time t r / t f 500 ps max. between 0.175 v and 0.525 v of output start-up time t_str 10 ms max. time at minimum supply voltage to be 0 s 0.05 10 -3 ui typ. phase jitter t pj 1 ps max. offset frequency: 12 khz to 20 mhz frequency aging * 2 f_aging 10 10 -6 / year max. +25 c,first year,v cc =2.5 v,3.3 v * 1 as per below table 1. *2 except: *** a table 1 frequency tolerance and aging p:differential lv-pecl d: differential lv-pecl l:lvds v:lvds h:hcsl eg-2121ca f 0 175 mhz frequency range eg-2102ca all range f 0 350 mhz all range f 0 175 mhz all range details of frequency tolerance a * 3 n * 4 a * 3 n * 4 a * 3 n * 4 a * 3 n * 4 a * 3 n * 4 hp: 100 10 -6 (0 c to +70 c) phpa phpn dhpa dhpn lhpa lhpn vhpa vhpn hhpa hhpn hr: 100 10 -6 (-5 c to +85 c) phra * 5 phrn * 5 dhra * 5 dhrn * 5 lhra * 5 lhrn * 5 vhra * 5 vhrn * 5 hhra hhrn gp: 50 10 -6 (0 c to +70 c) pgpa * 5 pgpn * 5 dgpa * 5 dgpn * 5 lgpa * 5 lgpn * 5 vgpa * 5 vgpn * 5 hgpa hgpn gr: 50 10 -6 (-5 c to +85 c) - pgrn * 5 - dgrn * 5 - lgrn * 5 - vgrn * 5 - hgrn hs: 100 10 -6 (-20 c to +70 c) phsa * 5 phsn * 5 dhsa * 5 dhsn * 5 lhsa * 5 lhsn * 5 vhsa * 5 vhsn * 5 hhsa hhsn frequency tolerance gs: 50 10 -6 (-20 c to +70 c) - pgsn * 5 - dgsn * 5 - lgsn * 5 - vgsn * 5 - hgsn * 3 this includes initial frequency tolerance, temperature variation, supply voltage variation, reflow drift, and aging(+25 c,10 years). * 4 this includes initial frequency tolerance, temperature variation, supply voltage variation, and reflow drift(except aging). * 5 53.125 mhz f 0 < 100 mhz : unavailable. table 2 jitter item symbol specifications remarks t dj 0.2 ps typ. deterministic jitter t rj 3 ps typ. random jitter t rms 3 ps typ. (rms of total distribution) t p-p 25 ps typ. peak to peak jitter * t acc 4 ps typ. accumulated jitter( ) n=2 to 50000 cycles * based on dts-2075 digital timing system made from wavecrest with jitter analysis software visi6. : differential lv-pecl, lvds o utput * based on sia-3100c signal integrity analyzer made from wavecrest. : hcsl output external dimensions ? ( unit:mm ) ? foot p rint ( recommended ) ? ( unit:mm ) ? pin map pin connection 1 oe 2 n.c. 3 gnd 4 out 5 out 6 v cc 5.08 1.2 0.2 5.08 #4 # 3 #2 #1 1.4 2.6 1.1 #5 #6 2.54 5.0 0.2 7.0 0.2 # 1 # 2 #4 #6 e eg-2 1 2 1 gpa 282a 250.000h #3 #5 note. oe pin = high : specified frequency output. oe pin = low : output is high impedance #3 is connected to the cover. 5.08 1.6 1.5 3.9 2.54 to maintain stable operation, provide by-pass capacitor with more than 0.1 f at a location as near as possible to the power source terminal of the crystal products (between v cc - gnd).
?qmems? epson toyocom in order to meet customer needs in a rapidly advancing digital, broadband and ubiquitous society, we are committed to offering products that are one step ahead of the market and a rank above the rest in quality. to achieve our goals, we follow a ?3d (three device) strategy? designed to drive both horizontal and vertical growth. we will to grow our three device categories of ?timing devices?, ?sensing devices? and ?optical devices?, and expand vertical growth through a combination of products from these categories. a quartz mems is any high added value quartz device that exploits the characteristics of quartz crystal material but that is produced using mems (micro-electro-mechanical system) processing technology. market needs are advancing faster than previously imagined toward smaller, more stable crystal products, but we will stay ahead of the curve by rolling out products that exceed market speed and quality requirements. we want to further accelerate the 3d strategy by qmems. quartz devices have become crucial in the network environment where products are increasingly intended for broadband, ubiquitous applications and where various types of terminals can transfer information almost immediately via lan and wan on a global scale. epson toyocom corporation addresses every single aspect within a network environment. the new corporation offers ?digital convergence? solutions to problems arising with products for consumer use, such as, core network systems and automotive systems. promotion of environmental management system conforming to international standards at epson toyocom, all environmental initiatives operate under the plan-do-check-action(pdca) cycle designed to achieve continuous improvements. the environmental management system (ems) operates under the iso 14001 environmental management standard. all of our major manufacturing and non-manufacturing sites,in japan and overseas, completed the acquisition of iso 14001 certif ication. working for high quality in order provide high quality and reliable products and services than meet customer needs, epson toyocom made early efforts towards obtaining iso9000 series certification and has acquired iso9001 for all business estab lishments in japan and abroad. we have also acquired iso/ts 16949 certification that is requested strongly by major automotive manufacturers as st andard. ? explanation of the mark that are using it for the catalog ? pb free. ? complies with eu rohs directive. *about the products without the pb-free mark. contains pb in products exempted by eu rohs directive. (contains pb in sealing glass, high melting temperature type solder or other.) ? the products have been designed for high reliab ility applications such as automotive. notice this material is subject to change without notice. any part of this material may not be reproduced or duplicated in any form or any means without the written permission of epson toyoc om. the information, applied circuitry, programming, usage, etc., written in this material is intended for reference only. epson to yocom does not assume any liability for the occurrence of infringing on any patent or copyright of a third party. this material does not autho rize the licensing for any patent or intellectual copyrights. any product described in this material may contain technology or the subject relating to strategic products under the control o f the foreign exchange and foreign trade law of japan and may require an export license from the ministry of international trade and industry or other approval from another government agency. ? ? ? ? you are requested not to use the products (and any technical information furnished, if any) for the development and/or manufact ure of weapon of mass destruction or for other military purposes. you are also requested that you would not make the products available to an y third party who may use the products for such prohibited purposes. these products are intended for general use in electronic equipment. when using them in specific applications that require extr emely high reliability, such as the applications stated below, you must obtain permission from epson toyocom in advance. / space equipment (artificial satellites, rockets, etc.) / transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / medical instruments to sustain life / submarine transmitters / power stations and related / fire work equipment and securit y equipment / traffic control equipment / and others requiring equivalent reliability. in this new crystal master for epson toyocom, product codes and markings will remain as previously identified prior to the merg er. due to the on-going strategy of gradual unification of part numbers, please review product codes and markings, as they will cha nge during the course of the coming months. we apologize for the inconvenience, but we will eventually have a unified part numbering system for epson toyocom that will be user friendly. iso 14000 is an international standard for environmental management that was established by the international standards organization in 1996 against the background of growing concern regarding global warming, destruction of the ozone la y er, and g lobal deforestation. iso/ts 16949 is a global standard based on qs-9001, a severe standard corresponding to the requirements from the automobile industry.
|
